RC Airplane Model Kit Caproni CA100 Scale 1:10
Caproni CA100 "Caproncino" - 1:10 Scale RC Wooden Model Airplane Kit
The Caproni CA100, affectionately nicknamed Caproncino, is a biplane trainer and touring aircraft designed in Italy based on the De Havilland D.H. 60, with some modifications typical of Caproni tradition: the wingspan of the lower wing was increased compared to the upper one, and the geometry of the tail surfaces was slightly revised. The prototype first flew towards the end of 1928, and series production began in 1929. Several models were built, differing mainly in their engines. Produced in large quantities, it was used in both civil and military contexts for initial pilot training and in Aeroclubs throughout Italy. Equipped with floats, it also successfully flew as a seaplane.
Today, two original airworthy examples survive and are flown regularly: one with land gear and the other with floats.
📐 Technical Data
- Scale: 1/10
- Lower wingspan: 100 cm
- Upper wingspan: 82 cm
- Length: 73 cm
- Wing area: 24.6 dm²
- Flying weight: 500–550 g
- Wing loading: 20–23 g/dm²
- RC Functions: Rudder, Elevator, Ailerons, Motor
- Power: LiPo 2-3S, 800–1000 mAh – BL Motor 60–100W 1000KV
🔨 Construction Features
Faithful to the original: The model faithfully reproduces the Caproncino at 1/10 scale, entirely made of wood like the original aircraft. The wings are ribbed with a flat-convex airfoil, docile and easy to build.
Birch-covered fuselage: As on the original, the fuselage is covered with 0.5 mm birch plywood, which ensures high structural stability while keeping weight to a minimum.
Quick field assembly: The wings slot onto 5 mm carbon spars and are held in place by magnets, for fast, tool-free assembly. The wing struts, permanently screwed to the lower wing, simply clip onto the upper wing.
Easy battery access: The upper part of the engine cowl is removable and secured by magnets and pins, for quick and convenient battery access.
Flight behavior: Thanks to its large wing area and low wing loading, the Caproncino flies docilely even at low speeds. The ailerons, present only on the lower wing but generously sized, ensure excellent maneuverability on all three axes. Note: Despite its good flight characteristics, the model is not intended for beginners — some experience with three-axis models is required to fly it.
📦 Kit Contents
The kit includes all the necessary components for the basic structure of the model:
- Two 1:1 scale construction drawings, color printed (fuselage with sections and formers + wings with ribs)
- High-quality woods, specifically selected according to their intended use to ensure the best stability-to-weight ratio: thin birch plywood, poplar plywood, balsa plywood, balsa wood, as well as various spruce, kiri, beech, and balsa strips
- 5 mm carbon spars for wing attachment
- Magnets and pins for cowl and wing attachment
- Scale wheels
- Pre-bent landing gear
- Metal fittings
- Control horns
- Thermoformed engine cowl
- Adhesive decals
- Dashboard with instrument print
⚙️ Required Components (NOT Included)
To complete the model, the following must be purchased separately:
- Glue: Wood glue and/or cyanoacrylate
- Paints and lightweight covering material
- Brushless motor: 60–100W, 1000KV
- ESC: Compatible with the chosen motor
- LiPo battery: 2S or 3S, 800–1000 mAh
- RC radio system: Receiver + transmitter (minimum 4 channels)
- Servos: For rudder, elevator, and ailerons
⚠️ Safety Warnings
This model aircraft kit is not a toy in the conventional sense and is not suitable for children and adolescents under 16 years of age. Its use requires technical knowledge and a sense of responsibility. We assume no liability for damages or injuries resulting from improper use or errors in the assembly instructions.
Please familiarize yourself with applicable laws and regulations before building and operating the model. We strongly recommend obtaining adequate insurance coverage.
The pilot is solely responsible for any damage to persons, animals, or property. It is recommended to obtain third-party liability insurance (RC). Use only in accordance with ENAC regulations and EU Regulation 2019/947.